Veratron VMH 70 7″ Sunlight Readable Touchscreen

Description

The Veratron VMH 70 7-Inch Sunlight Readable Touchscreen is built to manage large amounts of complex vessel data at once, running a real-time operating system that gives full control of critical engine information the moment the display powers on, no lengthy boot delay to wait through.

It can track four engines at once over NMEA 2000, or two engines through J1939 or analog connections instead, with enough configuration depth to group related readings logically, single or dual engine data, battery health, fuel and water levels, waste tank status, rudder and trim position, general onboard systems, navigation data, and weather, all organized the way an individual boater actually wants to view them rather than a fixed factory layout. An embedded light sensor adjusts screen brightness automatically for easy reading whether conditions are blazing sun or total darkness, and two camera inputs let a boater monitor the engine compartment while underway or keep an eye on deck activity while maneuvering, all through the same screen.

An embedded NMEA 2000 gateway brings sensor readings and alarms straight to this display without needing a separate converter purchased and wired in alongside it, a real cost and complexity savings over piecing together a similar setup from separate components.

Aluminum housing, mineral glass front lens, front-panel mount via mounting kit.

Worth comparing against our other marine gauges.

• 7″ Sun-readable IPS TFT touchscreen in a slim, low-profile housing
• Mineral glass front lens, reliable in high-temperature environments
• IPX7 rated as an exposed device
• Dual SAE J1939 CAN ports plus NMEA 2000 certification
• Fully configurable analog inputs with embedded NMEA 2000 gateway
• Customizable startup screen and GUI layout